ABSCO Industries, one of Australia's leading manufacturers of sheds and garages has developed ‘SNAP-TiTE’, an innovative patented design that dramatically reduces the time and effort required to assemble the range of ABSCO garden sheds.
SNAP-TiTE removes the long held perception that Kit form sheds are difficult to assemble. The ABSCO SNAP-TiTE system is revolutionary because it dramatically reduces the number of fasteners needed to assemble a garden shed. Many average size garden sheds require over 600 screws, nuts, bolts, and rivets to be fitted, whilst with some others, holes must be drilled during assembly.
Compare that with the innovative SNAP-TiTE system, which makes DIY construction very easy, because it uses only 200 fasteners to assemble an average size garden shed!
Not only does the SNAP-TiTE system make assembly easier and faster, the end result is also significantly stronger. ABSCO has put the SNAP-TiTE system to the test too, demonstrating superior strength in laboratory tests carried out to international ISO standards.That's because the revolutionary SNAP-TiTE system features significantly more anchorage points between the wall section and edge channels.
Compare that with the average garden shed and you'll see why! With SNAP-TiTE every corrugation on both sides of all wall sections feature a punched lug which locks into the patented edge channel to maximise strength.
Naturally, the benefit that the SNAP-TiTE system delivers by dramatically reducing the number of fasteners, translates to enormous savings in the time it takes to assemble a typical garden shed. With other brands, a whole weekend can be spent completing the installation.
Compare that with the innovativeSNAP-TiTE system, which enables the average home handyperson to complete the task in only a couple of hours!
The revolutionary SNAP-TiTE system not only makes assembly faster and easier, it also helps deliver a professional finish. That's because the snap-fit design of the wall and channel sections takes out the guesswork. With typical garden sheds these components must be aligned, drilled and fixed together with unsightly screws, rivets, or bolts.
Compare that to the SNAP-TiTE system, which aligns and snaps components together perfectly, without the need for drilling and fitting rows of fasteners!